How to Use Ford TPMS Programming Tool OEM

Understanding the Ford TPMS Programming Tool OEM

The Ford TPMS Programming Tool is an essential device for programming and servicing the Tire Pressure Monitoring System (TPMS) on Ford vehicles. This guide will walk you through the step-by-step process of using the tool effectively.

Step 1: Gather Necessary Equipment

• Ford TPMS Programming Tool (OEM)
• Compatible Ford vehicle
• Vehicle key or remote
• Owner's manual (optional for reference)

Step 2: Prepare the Vehicle

1. Ensure the vehicle is parked on a flat surface.
2. Turn off the ignition and ensure all doors are closed.
3. Check that the tires are inflated to the recommended PSI.

Step 3: Connect the TPMS Tool

1. Locate the OBD-II port in your vehicle, usually found under the dashboard near the driver's seat.
2. Plug the TPMS programming tool into the OBD-II port.
3. Turn the ignition to the "On" position without starting the engine.

Step 4: Access TPMS Programming Mode

1. Follow the prompts on the tool's display to select the appropriate programming mode.
2. Select the 'TPMS' programming option for your specific vehicle model.
3. Confirm the selection to enter programming mode.

Step 5: Program the TPMS Sensors

1. Once in programming mode, the tool will prompt you to initiate sensor learning.
2. Begin by activating each tire sensor. This can usually be done by either driving the vehicle or using a manual tool to trigger each sensor.
3. Follow on-screen instructions to complete sensor programming.

Step 6: Verify Sensor Activation

1. After programming, check the tool's display for a confirmation message.
2. Ensure that all tire sensors are reading correctly. If any sensor is not responding, repeat the activation process.
3. Consult the owner's manual if you encounter persistent issues.

Step 7: Disconnect the Tool

1. Once verification is complete, safely disconnect the TPMS programming tool from the OBD-II port.
2. Turn off the vehicle ignition.
3. Store the programming tool in a safe place for future use.

Step 8: Conduct a Final Check

1. Start the vehicle and monitor the dashboard for any TPMS warning lights.
2. Check tire pressures manually, if necessary, to ensure they meet safety guidelines.
3. Drive the vehicle to ensure that the TPMS system is functioning properly.

Conclusion

Using the Ford TPMS Programming Tool OEM effectively ensures that your vehicle's tire pressure monitoring system operates optimally. Following these steps will help maintain safety and performance on the road.

Contact us to discuss your requirements of TPMS Relearn Tool. Our experienced sales team can help you identify the options that best suit your needs.