Construction accounts for 21% of all deaths among US workers. The leading causes of private sector worker deaths (excluding highway collisions) in the construction industry were falls, followed by struck by object, electrocution, and caught-in/between. These "Fatal Four" are responsible for more than half of the construction worker deaths.
ZH TECH Product Page
To ensure your construction site stays safe and doesn&#;t end up a statistic, here are 13 items you may want to consider keeping nearby.
Security fencing around the site can keep the public out and allow controlled access for workers and visitors. Temporary chain-link fences work well, and there are companies that will install and remove them according to your job schedule. I would always have them install swinging gates where we were bringing the underground utilities into the site. This would eliminate the need to cut the fence.
Safety signage can make a big statement from the outside looking in. I would always use signs that read, "Safety Starts Here!" and "All Visitors Must Check In." You can also include "This Is a Controlled Access Area" and list required equipment, such as hard hats, safety vests, and safety glasses, as well as "OSHA Regulations Enforced."
Job information board should be posted at all job sites. On the board, include 911, local police and fire department numbers, and a map with directions to the nearest hospital.
First-aid kits are mandatory and should never be locked in the gang box when work is in progress. There are many types of first-aid kits you can choose from&#;some contain as many as 100 items. Make sure you have a proper first-aid kit for the work being done.
Personal protective equipment (PPE) is important to have and wear properly. Having extras in the job trailer or gang box is always a good idea. This can include safety glasses, ear protection, dust masks, hard hats, gloves, and safety vests.
Safety data sheets (SDS) or product safety data sheets are widely used for cataloging information on chemicals, chemical compounds, and mixtures. This information should be available for reference in case someone comes in contact with a particular product or material. Mobile apps can be used to access safety data sheets.
Eyewash bottles or an eyewash station are needed for quick flushing of eyes if debris or substances enter the eyes. Portable units typically have saline solution, while plumbed stations can use potable water of specified temperatures and flow rates.
Fire extinguishers are your first line of defense to keep a small fire from escalating. Having the proper type of extinguishers is critical, as some produce a powerful spray of water and others use foam or powder to put out fires. Know the correct type of extinguishers to use on your job.
Caution tape should be kept in the gang box, so you can quickly rope off areas to keep people out. There is a time to use caution tape and a time to use secured barricades&#;know the difference.
For more Safety Hearing Protector Wholesaleinformation, please contact us. We will provide professional answers.
Fall protection systems have come a long way in the last few years and include both permanent and mobile solutions. Employees should have proper fall protection equipment in good condition, as well as training to use it.
Ground-fault circuit interrupters (GFCI) can protect employees from electrical shock when a circuit experiences a difference in the current on the hot and neutral wire, such as when there's contact with water. It is good to know the proper amperage for the GFCI needed based on the equipment in use.
Proper selection of lifts and ladders is important, as is training employees to use them. With falls the number one cause of death in construction, it is good to plan ahead and know when to use a lift versus a ladder.
Lockout/tagout locks and labels should be readily available for use when you need to power down, lock, and label equipment that is being worked on. This improves visibility of disabled equipment and prevents unauthorized use and unexpected equipment startups.
Some advantages of foam earplugs are very low cost, high effectiveness, portability, size, and weight. However, one of the most important benefits of using foam earplugs is they don&#;t interfere at all with your cheek weld when shooting rifles and shotguns.
The disadvantages of foam earplugs depend greatly on the user. However, some people really just don&#;t like the feeling of having things inserted into their ears. Using foam earplugs correctly requires that you roll them small and insert them well into the outer ear canal so they can seal against the noise. Some people find this uncomfortable or even painful, and some people just get weirded out by it and refuse to use them.
If you haven&#;t used earplugs or cleaned your ears in a while, you will likely get some ear wax sticking to the plugs when you remove them. This also grosses some people out (though it could be seen as an advantage; you&#;re cleaning your ears a little). If you have a lot of wax in your ear canal, inserting an earplug may push it into a solid mass and block your hearing, and require a doctor or audiologist to remove it, which can be painful.
Foam plugs also block all sounds, including normal conversation. This is a tradeoff many people accept in favor of superior hearing protection.
Additionally, foam earplugs should technically only be used once before disposing of them, which isn&#;t great for the environment nor your wallet (though the cost per pair is very low). Don&#;t be tempted to reuse foam plugs more than once or twice, as they can get nasty bacteria on them and can cause an ear infection.
Want more information on Woodworking Ear Protection Bluetooth? Feel free to contact us.