Process of Linen Slippers
Gofar Product Page
'First prepare a pair of suitable slipper soles , then use cardboard to accurately copy the soles, and cut 2 pieces according to the paper pattern (one piece is the visible surface, you need to consider the color matching, the fabric is best to be elastic, the other piece is the bottom, you can use waste cloth, but it should be thicker), and you need to cut a piece of cotton (not too thick) or thin sponge of the same size, and a piece of hard cloth with a small circle of 1.5cm or iron the bottom cloth with cloth lining.
'Stack the upper, cotton, hard lining, and bottom cloth in sequence, and then fix it around the edge for a week (0.5cm). While sewing, put some cotton scraps in the middle, so that it feels better when stepping on it, but it must be stuffed evenly according to the rules of the foot, otherwise it is better not to stuff it.
'Now you have to make the upper. A lazy way to make the upper is to cut off the old slipper surface and iron it flat, and then copy it to paper, but pay attention to leaving 1CM on the side of the stitching. After you have the paper pattern of the upper, you need to cut a piece of face (consider color matching), a piece of lining (slightly thin, soft, preferably knitted fabric), a piece of acrylic cotton (or a piece of thin sponge), and a layer of hard lining (can be replaced with a harder cloth such as canvas). This will make the upper more stylish and not soft.
Contact us to discuss your requirements of China Moccasin Slippers Manufacturer. Our experienced sales team can help you identify the options that best suit your needs.
'Align the upper, cotton, hard lining and lining in order, and fix them around (preferably machine-sew 0.5CM). The trick to this step is to make the lining over the top and the face over the bottom, otherwise the lining will be uneven.
'Wrinkle the round toe of the shoe so that the toe is obviously arched in an arc shape, but it is better not to have obvious folds. Sisters need to experience this carefully. At the same time, roll the shoe mouth. This step is to sew the finished upper to the finished sole. The key point is: make three aligned stitching points, one, the center point of the toe is aligned with the center point of the sole; two, the left end point of the upper is aligned with the left starting point of the sole; three, the right end point of the upper is aligned with the right end point of the sole. Then sew in sequence. When sewing to the wrinkled part of the round toe of the upper, pay special attention to shrinking the round toe upper to the sole, but no obvious wrinkles should appear.
'Roll the sole and upper together for a week, and sew the first seam on the front of the shoe; the second seam is best to sew by hand, and pull the edge strip very tightly and fix it on the back of the sole:
a. Fix the rolled shoes to the ready-made foam sole. First, put the cloth sole of the slippers on the foam sole and evenly select 3 to 4 aligned stitching points, and sew these points first;
b. Then sew one week in sequence; the stitching needle method is backstitch, but the stitch length can be larger, which is faster;
The company is the world’s best Moccasin Slippers Manufacturer supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.